绑定手机号

应国家法规对于账号实名的要求,请您在进行下一步操作前,需要先完成手机绑定 (若绑定失败,请重新登录绑定)。了解更多

不绑定绑定手机号

360官网 | 360商城

推荐论坛版块活动众测积分兑换常见问题
本帖最后由 360fans53097741 于 2020-7-3 08:58 编辑
中标麒麟v10在arm64下360浏览器(chromium)访问崩溃(段错误)

V10.2.1002.1版本,启动后一直崩溃

V10.2.1003.25版本,直接出现段错误,无法启动

应该是chromium内核的错误

360社区

360社区


360社区

360社区



  1. [root@localhost browser360]# dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010]
  3. [    0.000000] Linux version 4.19.90-vhulk2001.1.0.0026.ns7.13.aarch64 NeoKylin Linux Adavanced Server @ CS2C (root@mockbuild) (gcc version 4.8.5 20150623 (NeoKylin 4.8.5-36) (GCC)) #1 SMP Wed Apr 15 17:06:21 CST 2020
  4. [    0.000000] efi: Getting EFI parameters from FDT:
  5. [    0.000000] efi: EFI v2.70 by EDK II
  6. [    0.000000] efi:  SMBIOS 3.0=0x17f840000  MEMATTR=0x17ce36118  ACPI 2.0=0x17c180000  MEMRESERVE=0x17c4b3d18
  7. [    0.000000] crashkernel reserved: 0x00000000dfe00000 - 0x00000000ffe00000 (512 MB)
  8. [    0.000000] cma: Reserved 512 MiB at 0x00000000a0000000
  9. [    0.000000] ACPI: Early table checksum verification disabled
  10. [    0.000000] ACPI: RSDP 0x000000017C180000 000024 (v02 BOCHS )
  11. [    0.000000] ACPI: XSDT 0x000000017C170000 00005C (v01 BOCHS  BXPCFACP 00000001      01000013)
  12. [    0.000000] ACPI: FACP 0x000000017C130000 00010C (v05 BOCHS  BXPCFACP 00000001 BXPC 00000001)
  13. [    0.000000] ACPI: DSDT 0x000000017C140000 004882 (v02 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
  14. [    0.000000] ACPI: APIC 0x000000017C120000 000198 (v03 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
  15. [    0.000000] ACPI: GTDT 0x000000017C110000 000060 (v02 BOCHS  BXPCGTDT 00000001 BXPC 00000001)
  16. [    0.000000] ACPI: MCFG 0x000000017C100000 00003C (v01 BOCHS  BXPCMCFG 00000001 BXPC 00000001)
  17. [    0.000000] ACPI: SPCR 0x000000017C0F0000 000050 (v02 BOCHS  BXPCSPCR 00000001 BXPC 00000001)
  18. [    0.000000] ACPI: IORT 0x000000017C0E0000 00007C (v00 BOCHS  BXPCIORT 00000001 BXPC 00000001)
  19. [    0.000000] ACPI: BGRT 0x000000017C160000 000038 (v01 INTEL  EDK2     00000002      01000013)
  20. [    0.000000] ACPI: SPCR: console: pl011,mmio,0x9000000,9600
  21. [    0.000000] ACPI: NUMA: Failed to initialise from firmware
  22. [    0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000017fffffff]
  23. [    0.000000] NUMA: NODE_DATA [mem 0x17fffe0c0-0x17fffffff]
  24. [    0.000000] Zone ranges:
  25. [    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ffffffff]
  26. [    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
  27. [    0.000000] Movable zone start for each node
  28. [    0.000000] Early memory node ranges
  29. [    0.000000]   node   0: [mem 0x0000000040000000-0x000000017c18ffff]
  30. [    0.000000]   node   0: [mem 0x000000017c190000-0x000000017c4affff]
  31. [    0.000000]   node   0: [mem 0x000000017c4b0000-0x000000017f78ffff]
  32. [    0.000000]   node   0: [mem 0x000000017f790000-0x000000017f81ffff]
  33. [    0.000000]   node   0: [mem 0x000000017f820000-0x000000017f82ffff]
  34. [    0.000000]   node   0: [mem 0x000000017f830000-0x000000017f94ffff]
  35. [    0.000000]   node   0: [mem 0x000000017f950000-0x000000017fffffff]
  36. [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000017fffffff]
  37. [    0.000000] On node 0 totalpages: 81920
  38. [    0.000000]   DMA32 zone: 48 pages used for memmap
  39. [    0.000000]   DMA32 zone: 0 pages reserved
  40. [    0.000000]   DMA32 zone: 49152 pages, LIFO batch:3
  41. [    0.000000]   Normal zone: 32 pages used for memmap
  42. [    0.000000]   Normal zone: 32768 pages, LIFO batch:3
  43. [    0.000000] psci: probing for conduit method from ACPI.
  44. [    0.000000] psci: PSCIv1.0 detected in firmware.
  45. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  46. [    0.000000] psci: Trusted OS migration not required
  47. [    0.000000] psci: SMC Calling Convention v1.1
  48. [    0.000000] ACPI: SRAT not present
  49. [    0.000000] random: get_random_bytes called from start_kernel+0xa4/0x510 with crng_init=0
  50. [    0.000000] percpu: Embedded 3 pages/cpu s124760 r8192 d63656 u196608
  51. [    0.000000] pcpu-alloc: s124760 r8192 d63656 u196608 alloc=3*65536
  52. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  53. [    0.000000] Detected VIPT I-cache on CPU0
  54. [    0.000000] CPU features: enabling workaround for Mismatched cache type
  55. [    0.000000] CPU features: detected: GIC system register CPU interface
  56. [    0.000000] CPU features: detected: Hardware dirty bit management
  57. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 81840
  58. [    0.000000] Policy zone: Normal
  59. [    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.90-vhulk2001.1.0.0026.ns7.13.aarch64 root=/dev/mapper/klas-root ro crashkernel=auto rd.lvm.lv=klas/root rd.lvm.lv=klas/swap video=efifb:off video=VGA-1:640x480-32@60me LANG=zh_CN.UTF-8
  60. [    0.000000] software IO TLB: mapped [mem 0xdbe00000-0xdfe00000] (64MB)
  61. [    0.000000] Memory: 4073728K/5242880K available (9532K kernel code, 1426K rwdata, 3648K rodata, 3840K init, 2985K bss, 644864K reserved, 524288K cma-reserved)
  62. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  63. [    0.000000] ftrace: allocating 34068 entries in 9 pages
  64. [    0.000000] rcu: Hierarchical RCU implementation.
  65. [    0.000000] rcu:         RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
  66. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  67. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  68. [    0.000000] GICv3: Distributor has no Range Selector support
  69. [    0.000000] GICv3: no VLPI support, no direct LPI support
  70. [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000
  71. [    0.000000] ACPI: SRAT not present
  72. [    0.000000] ITS [mem 0x08080000-0x0809ffff]
  73. [    0.000000] ITS@0x0000000008080000: allocated 8192 Devices @140280000 (indirect, esz 8, psz 64K, shr 1)
  74. [    0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @140290000 (flat, esz 8, psz 64K, shr 1)
  75. [    0.000000] GICv3: using LPI property table @0x00000001402a0000
  76. [    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000001402c0000
  77. [    0.000000] rcu:         Offload RCU callbacks from CPUs: (none).
  78. [    0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (virt).
  79. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
  80. [    0.000001] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns
  81. [    0.000044] Console: colour dummy device 80x25
  82. [    0.000112] ACPI: Core revision 20180810
  83. [    0.000251] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=1000000)
  84. [    0.000253] pid_max: default: 32768 minimum: 301
  85. [    0.000324] Security Framework initialized
  86. [    0.000326] Yama: becoming mindful.
  87. [    0.002301] Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes)
  88. [    0.003269] Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes)
  89. [    0.003296] Mount-cache hash table entries: 16384 (order: 1, 131072 bytes)
  90. [    0.003312] Mountpoint-cache hash table entries: 16384 (order: 1, 131072 bytes)
  91. [    0.004129] ACPI PPTT: No PPTT table found, cpu topology may be inaccurate
  92. [    0.004289] ASID allocator initialised with 32768 entries
  93. [    0.004315] rcu: Hierarchical SRCU implementation.
  94. [    0.004762] Platform MSI: ITS@0x8080000 domain created
  95. [    0.004769] PCI/MSI: ITS@0x8080000 domain created
  96. [    0.004806] Remapping and enabling EFI services.
  97. [    0.005012] smp: Bringing up secondary CPUs ...
  98. [    0.036768] Detected VIPT I-cache on CPU1
  99. [    0.036791] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000
  100. [    0.036841] GICv3: CPU1: using allocated LPI pending table @0x00000001402d0000
  101. [    0.036871] CPU1: Booted secondary processor 0x0000000001 [0x481fd010]
  102. [    0.068591] Detected VIPT I-cache on CPU2
  103. [    0.068619] GICv3: CPU2: found redistributor 2 region 0:0x00000000080e0000
  104. [    0.068681] GICv3: CPU2: using allocated LPI pending table @0x00000001402e0000
  105. [    0.068716] CPU2: Booted secondary processor 0x0000000002 [0x481fd010]
  106. [    0.101021] Detected VIPT I-cache on CPU3
  107. [    0.101045] GICv3: CPU3: found redistributor 3 region 0:0x0000000008100000
  108. [    0.101094] GICv3: CPU3: using allocated LPI pending table @0x00000001402f0000
  109. [    0.101122] CPU3: Booted secondary processor 0x0000000003 [0x481fd010]
  110. [    0.101217] smp: Brought up 1 node, 4 CPUs
  111. [    0.101229] SMP: Total of 4 processors activated.
  112. [    0.101233] CPU features: detected: Privileged Access Never
  113. [    0.101234] CPU features: detected: User Access Override
  114. [    0.101236] CPU features: detected: Data cache clean to Point of Persistence
  115. [    0.101237] CPU features: detected: RAS Extension Support
  116. [    0.101239] CPU features: detected: CRC32 instructions
  117. [    0.101367] CPU: All CPU(s) started at EL1
  118. [    0.101389] alternatives: patching kernel code
  119. [    0.102283] devtmpfs: initialized
  120. [    0.103107] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  121. [    0.103122] futex hash table entries: 1024 (order: 0, 65536 bytes)
  122. [    0.103512] pinctrl core: initialized pinctrl subsystem
  123. [    0.103609] SMBIOS 3.0.0 present.
  124. [    0.103613] DMI: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
  125. [    0.103895] NET: Registered protocol family 16
  126. [    0.104046] audit: initializing netlink subsys (disabled)
  127. [    0.104114] audit: type=2000 audit(0.100:1): state=initialized audit_enabled=0 res=1
  128. [    0.104289] cpuidle: using governor menu
  129. [    0.104446] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  130. [    0.106193] DMA: preallocated 256 KiB pool for atomic allocations
  131. [    0.106229] ACPI: bus type PCI registered
  132. [    0.106232] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  133. [    0.106266] Serial: AMBA PL011 UART driver
  134. [    0.107908] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  135. [    0.107911] HugeTLB registered 512 MiB page size, pre-allocated 0 pages
  136. [    0.108717] ACPI: Added _OSI(Module Device)
  137. [    0.108719] ACPI: Added _OSI(Processor Device)
  138. [    0.108721] ACPI: Added _OSI(3.0 _SCP Extensions)
  139. [    0.108722] ACPI: Added _OSI(Processor Aggregator Device)
  140. [    0.108724] ACPI: Added _OSI(Linux-Dell-Video)
  141. [    0.108725] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
  142. [    0.113139] ACPI: 1 ACPI AML tables successfully acquired and loaded
  143. [    0.113859] ACPI: Interpreter enabled
  144. [    0.113862] ACPI: Using GIC for interrupt routing
  145. [    0.113875] ACPI: MCFG table detected, 1 entries
  146. [    0.115739] ARMH0011:00: ttyAMA0 at MMIO 0x9000000 (irq = 4, base_baud = 0) is a SBSA
  147. [    0.151775] console [ttyAMA0] enabled
  148. [    0.152873] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  149. [    0.153164] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  150. [    0.153599] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
  151. [    0.153969] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
  152. [    0.154484] acpi PNP0A08:00: ECAM area [mem 0x4010000000-0x401fffffff] reserved by PNP0C02:00
  153. [    0.155034] acpi PNP0A08:00: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]
  154. [    0.155380] Remapped I/O 0x000000003eff0000 to [io  0x0000-0xffff window]
  155. [    0.155744] PCI host bridge to bus 0000:00
  156. [    0.155920] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff window]
  157. [    0.156237] pci_bus 0000:00: root bus resource [io  0x0000-0xffff window]
  158. [    0.156522] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff window]
  159. [    0.156849] pci_bus 0000:00: root bus resource [bus 00-ff]
  160. [    0.157135] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
  161. [    0.157298] pci 0000:00:01.0: [8086:24cd] type 00 class 0x0c0320
  162. [    0.157765] pci 0000:00:01.0: reg 0x10: [mem 0x10043000-0x10043fff]
  163. [    0.159829] pci 0000:00:02.0: [1af4:1050] type 00 class 0x038000
  164. [    0.161176] pci 0000:00:02.0: reg 0x14: [mem 0x10042000-0x10042fff]
  165. [    0.163155] pci 0000:00:02.0: reg 0x20: [mem 0x8000000000-0x8000003fff 64bit pref]
  166. [    0.164020] pci 0000:00:03.0: [1af4:1002] type 00 class 0x00ff00
  167. [    0.164381] pci 0000:00:03.0: reg 0x10: [io  0x0060-0x007f]
  168. [    0.165883] pci 0000:00:03.0: reg 0x20: [mem 0x8000004000-0x8000007fff 64bit pref]
  169. [    0.166358] pci 0000:00:05.0: [1af4:1004] type 00 class 0x010000
  170. [    0.166703] pci 0000:00:05.0: reg 0x10: [io  0x0000-0x003f]
  171. [    0.167001] pci 0000:00:05.0: reg 0x14: [mem 0x10041000-0x10041fff]
  172. [    0.169150] pci 0000:00:05.0: reg 0x20: [mem 0x8000008000-0x800000bfff 64bit pref]
  173. [    0.169727] pci 0000:00:12.0: [1af4:1000] type 00 class 0x020000
  174. [    0.170061] pci 0000:00:12.0: reg 0x10: [io  0x0040-0x005f]
  175. [    0.170353] pci 0000:00:12.0: reg 0x14: [mem 0x10040000-0x10040fff]
  176. [    0.171298] pci 0000:00:12.0: reg 0x20: [mem 0x800000c000-0x800000ffff 64bit pref]
  177. [    0.171630] pci 0000:00:12.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
  178. [    0.171835] pci 0000:00:1e.0: [1b36:0001] type 01 class 0x060400
  179. [    0.172942] pci 0000:00:1e.0: reg 0x10: [mem 0x8000011000-0x80000110ff 64bit]
  180. [    0.174119] pci 0000:00:1f.0: [1b36:0001] type 01 class 0x060400
  181. [    0.175214] pci 0000:00:1f.0: reg 0x10: [mem 0x8000010000-0x80000100ff 64bit]
  182. [    0.176552] pci_bus 0000:01: extended config space not accessible
  183. [    0.177620] pci_bus 0000:02: extended config space not accessible
  184. [    0.178847] pci 0000:00:12.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref]
  185. [    0.180076] pci 0000:00:02.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref]
  186. [    0.181042] pci 0000:00:03.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref]
  187. [    0.181400] pci 0000:00:05.0: BAR 4: assigned [mem 0x8000008000-0x800000bfff 64bit pref]
  188. [    0.181816] pci 0000:00:12.0: BAR 4: assigned [mem 0x800000c000-0x800000ffff 64bit pref]
  189. [    0.182173] pci 0000:00:01.0: BAR 0: assigned [mem 0x10040000-0x10040fff]
  190. [    0.182760] pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff]
  191. [    0.183335] pci 0000:00:05.0: BAR 1: assigned [mem 0x10042000-0x10042fff]
  192. [    0.183628] pci 0000:00:12.0: BAR 1: assigned [mem 0x10043000-0x10043fff]
  193. [    0.183922] pci 0000:00:1e.0: BAR 0: assigned [mem 0x8000010000-0x80000100ff 64bit]
  194. [    0.184837] pci 0000:00:1f.0: BAR 0: assigned [mem 0x8000010100-0x80000101ff 64bit]
  195. [    0.185756] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
  196. [    0.186306] pci 0000:00:03.0: BAR 0: assigned [io  0x1040-0x105f]
  197. [    0.186871] pci 0000:00:12.0: BAR 0: assigned [io  0x1060-0x107f]
  198. [    0.187412] pci 0000:00:1e.0: PCI bridge to [bus 01]
  199. [    0.189065] pci 0000:00:1f.0: PCI bridge to [bus 02]
  200. [    0.191488] pci_bus 0000:00: resource 4 [mem 0x10000000-0x3efeffff window]
  201. [    0.191490] pci_bus 0000:00: resource 5 [io  0x0000-0xffff window]
  202. [    0.191492] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff window]
  203. [    0.191538] ACPI: PCI Interrupt Link [GSI0] (IRQs *35)
  204. [    0.191769] ACPI: PCI Interrupt Link [GSI1] (IRQs *36)
  205. [    0.192076] ACPI: PCI Interrupt Link [GSI2] (IRQs *37)
  206. [    0.192302] ACPI: PCI Interrupt Link [GSI3] (IRQs *38)
  207. [    0.192913] vgaarb: loaded
  208. [    0.193233] SCSI subsystem initialized
  209. [    0.193422] ACPI: bus type USB registered
  210. [    0.193620] usbcore: registered new interface driver usbfs
  211. [    0.193860] usbcore: registered new interface driver hub
  212. [    0.194126] usbcore: registered new device driver usb
  213. [    0.194366] pps_core: LinuxPPS API ver. 1 registered
  214. [    0.194576] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  215. [    0.194961] PTP clock support registered
  216. [    0.195257] EDAC MC: Ver: 3.0.0
  217. [    0.195557] Registered efivars operations
  218. [    0.196013] NetLabel: Initializing
  219. [    0.196163] NetLabel:  domain hash size = 128
  220. [    0.196346] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
  221. [    0.196601] NetLabel:  unlabeled traffic allowed by default
  222. [    0.197030] clocksource: Switched to clocksource arch_sys_counter
  223. [    0.212216] VFS: Disk quotas dquot_6.6.0
  224. [    0.212429] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
  225. [    0.212898] pnp: PnP ACPI init
  226. [    0.213235] system 00:00: [mem 0x4010000000-0x401fffffff window] could not be reserved
  227. [    0.213577] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  228. [    0.213584] pnp: PnP ACPI: found 1 devices
  229. [    0.216410] NET: Registered protocol family 2
  230. [    0.216873] tcp_listen_portaddr_hash hash table entries: 4096 (order: 0, 65536 bytes)
  231. [    0.217364] TCP established hash table entries: 65536 (order: 3, 524288 bytes)
  232. [    0.217754] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
  233. [    0.218428] TCP: Hash tables configured (established 65536 bind 65536)
  234. [    0.218741] UDP hash table entries: 4096 (order: 1, 131072 bytes)
  235. [    0.219017] UDP-Lite hash table entries: 4096 (order: 1, 131072 bytes)
  236. [    0.219350] NET: Registered protocol family 1
  237. [    0.219873] PCI: CLS 0 bytes, default 64
  238. [    0.219908] Unpacking initramfs...
  239. [    0.492011] Freeing initrd memory: 20288K
  240. [    0.492728] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 13 counters available
  241. [    0.493083] kvm [1]: HYP mode not available
  242. [    0.493863] Initialise system trusted keyrings
  243. [    0.494132] workingset: timestamp_bits=42 max_order=17 bucket_order=0
  244. [    0.495480] zbud: loaded
  245. [    0.530802] NET: Registered protocol family 38
  246. [    0.531029] Key type asymmetric registered
  247. [    0.531207] Asymmetric key parser 'x509' registered
  248. [    0.531464] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  249. [    0.531859] io scheduler noop registered
  250. [    0.532029] io scheduler deadline registered (default)
  251. [    0.532320] io scheduler cfq registered
  252. [    0.532485] io scheduler mq-deadline registered (default)
  253. [    0.532713] io scheduler kyber registered
  254. [    0.532917] io scheduler bfq registered
  255. [    0.533242] atomic64_test: passed
  256. [    0.533889] pl061_gpio ARMH0061:00: PL061 GPIO chip @0x0000000009030000 registered
  257. [    0.536636] PCI Interrupt Link [GSI2] enabled at IRQ 37
  258. [    0.538178] PCI Interrupt Link [GSI3] enabled at IRQ 38
  259. [    0.538497] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  260. [    0.538921] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  261. [    0.539288] ACPI: Power Button [PWRB]
  262. [    0.539736] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  263. [    0.540609] ACPI PPTT: No PPTT table found, cache topology may be inaccurate
  264. [    0.540929] ACPI PPTT: No PPTT table found, cache topology may be inaccurate
  265. [    0.541236] cacheinfo: Unable to detect cache hierarchy for CPU 0
  266. [    0.541509] rdac: device handler registered
  267. [    0.541785] hp_sw: device handler registered
  268. [    0.541970] emc: device handler registered
  269. [    0.542229] alua: device handler registered
  270. [    0.542582] libphy: Fixed MDIO Bus: probed
  271. [    0.542906] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  272. [    0.543185] ehci-pci: EHCI PCI platform driver
  273. [    0.545688] PCI Interrupt Link [GSI0] enabled at IRQ 35
  274. [    0.546194] ehci-pci 0000:00:01.0: EHCI Host Controller
  275. [    0.546481] ehci-pci 0000:00:01.0: new USB bus registered, assigned bus number 1
  276. [    0.546948] ehci-pci 0000:00:01.0: irq 37, io mem 0x10040000
  277. [    0.587054] ehci-pci 0000:00:01.0: USB 2.0 started, EHCI 1.00
  278. [    0.587518] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  279. [    0.587886] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  280. [    0.588192] usb usb1: Product: EHCI Host Controller
  281. [    0.588401] usb usb1: Manufacturer: Linux 4.19.90-vhulk2001.1.0.0026.ns7.13.aarch64 ehci_hcd
  282. [    0.588758] usb usb1: SerialNumber: 0000:00:01.0
  283. [    0.589196] hub 1-0:1.0: USB hub found
  284. [    0.589410] hub 1-0:1.0: 6 ports detected
  285. [    0.589968] ehci-platform: EHCI generic platform driver
  286. [    0.590249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  287. [    0.590521] ohci-pci: OHCI PCI platform driver
  288. [    0.590720] uhci_hcd: USB Universal Host Controller Interface driver
  289. [    0.591106] mousedev: PS/2 mouse device common for all mice
  290. [    0.591644] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
  291. [    0.593061] EFI Variables Facility v0.08 2004-May-17
  292. [    0.594084] hidraw: raw HID events driver (C) Jiri Kosina
  293. [    0.594420] usbcore: registered new interface driver usbhid
  294. [    0.594658] usbhid: USB HID core driver
  295. [    0.595021] Initializing XFRM netlink socket
  296. [    0.595339] NET: Registered protocol family 10
  297. [    0.595931] Segment Routing with IPv6
  298. [    0.596116] NET: Registered protocol family 17
  299. [    0.596560] registered taskstats version 1
  300. [    0.596750] Loading compiled-in X.509 certificates
  301. [    0.624593] Loaded X.509 cert 'EulerOS kernel signing key: dd2d6dce204c05eaa763848f1a05bc17fd9c552a'
  302. [    0.625288] zswap: loaded using pool lzo/zbud
  303. [    0.628085] Key type big_key registered
  304. [    0.628478] rtc-efi rtc-efi: setting system clock to 2020-07-01 08:55:52 UTC (1593593752)
  305. [    0.629834] SDEI NMI watchdog: Disable SDEI NMI Watchdog in VM
  306. [    0.630850] Freeing unused kernel memory: 3840K
  307. [    0.677132] Run /init as init process
  308. [    0.681817] random: systemd: uninitialized urandom read (16 bytes read)
  309. [    0.682379] random: systemd: uninitialized urandom read (16 bytes read)
  310. [    0.682677] random: systemd: uninitialized urandom read (16 bytes read)
  311. [    0.685329] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  312. [    0.686152] systemd[1]: Detected virtualization kvm.
  313. [    0.686370] systemd[1]: Detected architecture arm64.
  314. [    0.686583] systemd[1]: Running in initial RAM disk.
  315. [    0.687355] systemd[1]: Set hostname to <localhost.localdomain>.
  316. [    0.719761] systemd[1]: Reached target Timers.
  317. [    0.720526] systemd[1]: Created slice Root Slice.
  318. [    0.721011] systemd[1]: Listening on udev Control Socket.
  319. [    0.721499] systemd[1]: Reached target Swap.
  320. [    0.721882] systemd[1]: Reached target Local File Systems.
  321. [    0.856277] device-mapper: uevent: version 1.0.3
  322. [    0.856632] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
  323. [    0.957055] usb 1-1: new high-speed USB device number 2 using ehci-pci
  324. [    1.086434] virtio-pci 0000:00:03.0: enabling device (0005 -> 0007)
  325. [    1.088855] PCI Interrupt Link [GSI1] enabled at IRQ 36
  326. [    1.089110] virtio-pci 0000:00:05.0: enabling device (0005 -> 0007)
  327. [    1.091623] virtio-pci 0000:00:12.0: enabling device (0005 -> 0007)
  328. [    1.168733] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
  329. [    1.169128] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
  330. [    1.169431] usb 1-1: Product: QEMU USB Tablet
  331. [    1.169615] usb 1-1: Manufacturer: QEMU
  332. [    1.169778] usb 1-1: SerialNumber: 28754-0000:00:01.0-1
  333. [    1.172433] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
  334. [    1.173077] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.0-1/input0
  335. [    1.327051] usb 1-2: new high-speed USB device number 3 using ehci-pci
  336. [    1.366269] [drm] pci: virtio-gpu-pci detected at 0000:00:02.0
  337. [    1.368007] [drm] virgl 3d acceleration not supported by host
  338. [    1.368340] scsi host0: Virtio SCSI HBA
  339. [    1.370529] [TTM] Zone  kernel: Available graphics memory: 2311072 kiB
  340. [    1.371687] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
  341. [    1.371932] scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
  342. [    1.372029] [TTM] Initializing pool allocator
  343. [    1.372636] [TTM] Initializing DMA pool allocator
  344. [    1.372705] scsi 0:0:0:2: CD-ROM            QEMU     QEMU CD-ROM      2.5+ PQ: 0 ANSI: 5
  345. [    1.373144] [drm] number of scanouts: 1
  346. [    1.373408] [drm] number of cap sets: 0
  347. [    1.374410] Console: switching to colour frame buffer device 128x48
  348. [    1.377945] virtio_gpu virtio0: fb0: virtiodrmfb frame buffer device
  349. [    1.403821] random: fast init done
  350. [    1.407198] [drm] Initialized virtio_gpu 0.0.1 0 for virtio0 on minor 0
  351. [    1.423855] sd 0:0:0:0: Power-on or device reset occurred
  352. [    1.424645] sd 0:0:0:0: [sda] 134217728 512-byte logical blocks: (68.7 GB/64.0 GiB)
  353. [    1.425052] sd 0:0:0:0: [sda] Write Protect is off
  354. [    1.425261] sd 0:0:0:0: [sda] Mode Sense: 63 00 00 08
  355. [    1.425347] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  356. [    1.426718] sr 0:0:0:2: Power-on or device reset occurred
  357. [    1.427146] sr 0:0:0:2: [sr0] scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray
  358. [    1.427471] cdrom: Uniform CD-ROM driver Revision: 3.20
  359. [    1.427999] sr 0:0:0:2: Attached scsi CD-ROM sr0
  360. [    1.429820]  sda: sda1 sda2 sda3
  361. [    1.430807] sd 0:0:0:0: [sda] Attached SCSI disk
  362. [    1.538798] usb 1-2: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
  363. [    1.539185] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=11
  364. [    1.539491] usb 1-2: Product: QEMU USB Keyboard
  365. [    1.539684] usb 1-2: Manufacturer: QEMU
  366. [    1.539847] usb 1-2: SerialNumber: 68284-0000:00:01.0-2
  367. [    1.542436] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:01.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
  368. [    1.607442] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:01.0-2/input0
  369. [    2.394705] SGI XFS with ACLs, security attributes, no debug enabled
  370. [    2.403469] XFS (dm-0): Mounting V5 Filesystem
  371. [    2.560145] XFS (dm-0): Ending clean mount
  372. [    3.049847] systemd-journald[148]: Received SIGTERM from PID 1 (systemd).
  373. [    3.182193] systemd: 15 output lines suppressed due to ratelimiting
  374. [    3.793090] systemd[1]: Inserted module 'ip_tables'
  375. [    5.612252] systemd-journald[1665]: Received request to flush runtime journal from PID 1
  376. [    7.231274] sd 0:0:0:0: Attached scsi generic sg0 type 0
  377. [    7.231791] sr 0:0:0:2: Attached scsi generic sg1 type 5
  378. [    7.494950] cryptd: max_cpu_qlen set to 1000
  379. [    7.503759] VFS: Open an write opened block device exclusively dm-1 [2829 swapon].
  380. [    7.557112] Adding 5242816k swap on /dev/mapper/klas-swap.  Priority:-2 extents:1 across:5242816k FS
  381. [    7.705213] XFS (sda2): Mounting V5 Filesystem
  382. [    7.770791] XFS (sda2): Ending clean mount
  383. [    7.823831] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  384. [    8.647304] XFS (dm-2): Mounting V5 Filesystem
  385. [    8.877301] XFS (dm-2): Ending clean mount
  386. [    9.034976] RPC: Registered named UNIX socket transport module.
  387. [    9.035252] RPC: Registered udp transport module.
  388. [    9.035590] RPC: Registered tcp transport module.
  389. [    9.036065] RPC: Registered tcp NFSv4.1 backchannel transport module.
  390. [   11.699994] random: crng init done
  391. [   11.701188] random: 7 urandom warning(s) missed due to ratelimiting
  392. [   13.234193] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  393. [   13.260274] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  394. [   18.229758] tun: Universal TUN/TAP device driver, 1.6
  395. [   18.428771] virbr0: port 1(virbr0-nic) entered blocking state
  396. [   18.429042] virbr0: port 1(virbr0-nic) entered disabled state
  397. [   18.429325] device virbr0-nic entered promiscuous mode
  398. [   18.639824] virbr0: port 1(virbr0-nic) entered blocking state
  399. [   18.640104] virbr0: port 1(virbr0-nic) entered listening state
  400. [   18.749446] virbr0: port 1(virbr0-nic) entered disabled state
  401. [   24.631173] Bridge firewalling registered
  402. [   25.199821] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
  403. [ 3114.751109] fuse init (API version 7.27)
  404. [ 3121.592598] ISO 9660 Extensions: Microsoft Joliet Level 3
  405. [ 3121.699741] ISO 9660 Extensions: RRIP_1991A

复制代码


共 2 个关于中标麒麟v10在arm64下所有网页访问崩溃(或段错误)的回复 最后回复于 2020-7-6 17:16

评论

直达楼层

360fans53097741 LV2.下士 楼主 发表于 2020-7-3 15:45 | 显示全部楼层 | 私信
  1. $getconf PAGESIZE
  2. 65536
复制代码
紫夜ミ月 产品答疑师 发表于 2020-7-6 17:16 | 显示全部楼层 | 私信
该问题已修复,会在后续版本中修复
360fans_kj5wK6 您好,请问解决这个问题除了编译内核的方法外,怎样让chromium适应65535的pagesize 
2020-7-27 13:12回复
您需要登录后才可以回帖 登录 | 注册

本版积分规则

360fans53097741 LV2.下士

粉丝:0 关注:0 积分:48

精华:0 金币:51 经验:42

最后登录时间:2020-9-18

私信 加好友

最新活动

2022年360年度明星体验官评选结果出炉!

排行榜

热度排行 查看排行
今日 本周 本月 全部
    今日 本周 本月 全部

      内容推荐 热门推荐最新主帖

      关注360粉丝团,了解最新活动,抽锦鲤大奖,还有在线客服小姐姐等你来撩哦~

      快速回复 返回顶部 返回列表