本帖最后由 民叔ljshsh 于 2018-5-18 10:16 编辑
版主前言: 感激楼主这位外国机友为广大机友提供了旗舰版无限重启的解除方案,且经 @蔚然成麟 机友的热心整理和尝试 使不少饱受困扰的机友救活了手机 作为机友,在此对楼主、特别是@蔚然成麟 机友致以深深的敬意! 以下是楼主的原贴内容:
Troubleshooting bootloop troubleshooting for QK8692-M02
This guide applies to cases where the phone has just opened the logo and then shut down and continue to logo and then repeat off repeatedly. if your phone opens at the logo and does not shut down or boot into the system, then you are experiencing another Problem that could be a hardware failure (If you had flashed stock rom). Make sure your computer has installed Qiku Bootloader Interface Driver in manage device.
For the rom mod if you have problems with Qualcomm HS-USB QDLoader 9008 then there is a simple way to flash the original rom. Will guide at the end.
These are the things you need: https://1drv.ms/f/s!AlR9VFDKTFs8onLIJmX04GUje1Za
This contains the following tools:
1. DRIVER QIKU-SETUP.rar ( To installed driver)
2. YGDP_Tool_V5.00.rar (Brush tool)
3. Fastboot.rar ( To use fastboot to flash boot.img and recovery.img)
4. params.bak (my params if you need erase pass with YGDP tool)
5. cmd-here-windows-10.zip ( to open command here)
6. Qiku-TWRP-recovery_4Cores_EN.img
7. TWRP_Recovery_4Cores_CN.img ( Chinese language can not perfect)
8. V17_Stock_Boot_4Cores.img
9. V17_Stock_Recovery_4Cores.img
10. V18_Stock_boot_4Cores.img
11. V18_Stock_recovery_4Cores.img
12. V155_Stock_Boot_4Cores.img
13. V155_Stock_Recovery_4Cores.img
14. emmc-backup-qiku.rar (Qualcomm HS-USB QDLoader 9008)
15. Win32DiskImager-1.0.0-binary.zip (Qualcomm HS-USB QDLoader 9008)
16. 5.1.1 v155 image.rar (if you use v.155)
17.v2.0 android 6.0 image.rar
By replacing the default boot and recovery partition by rebooting the boot and recovery mods to support 4 cores (0-3), the phone can boot without a bootloop. We know that the default 1.0 is locked bootloader and 2.0 has unlocked bootloader. For machines running 1.0 required to unlock then the brush instead of boot and recovery. Version 2.0 only brush replacement boot and recovery only.
Download all file and put in same folder, extracting fastboot.rar and putting it all there.
引导 全部是英文(.docx): https://1drv.ms/w/s!AlR9VFDKTFs8owNOmG_LeydniBb5#Important, each time you reinstall rom you have to flash back to the recovery and recovery image
Sorry I only shared about the bug I am having and how to solve it efficiently, as well as attach the .docx file with the image to everyone in my link. I do not know how to pack the .CP8 or .CBP to line brush file. It is all about honing and trying.
作为机友,在此对楼主、特别是 @蔚然成麟 机友致以深深的敬意!
|
评论
直达楼层